Cement Products - PMC

Cevronseperator Cement

Productspecific Banners Zimbabwe PMC


Product Description

Porthold Masonry Cement (PMC) is a cement made at the PPC Bulawayo Factory from high quality raw materials. Clinker being inter-ground with gypsum and an approptiate amount of extender.


PMC is a masonry cement type MC 22,5. Typical applications are mortar, plaster, masonry products, paving, precast products and soil stabilisation. PMC is a tried and tested product that has been engineered to achieve a consistent and appropriate performance. The cost of PMC has been optimised for a broad range of applications, whilst maintaining the appropriate levels of quality.


PMC is a cement designed to meet the type MC 22,5 strength class of SAZS ENV 413-1 for Masonry Cements and is identified as:
  • Cement SAZS ENV 413-1 MC 22,5

Typical Properties

Typical technical data is supplied below. Further technical information can be obtained from the Sales and Marketing telephone numbers listed above. PPC has comprehensively equipped chemical, cement and concrete laboratories and can supply specific information and assistance regarding cement and concrete technology.

Typical Properties

Chemical Composition
Typical Test Results
Specific Requirements
SAZS ENV 413-1 MC 22,5
Sulphur Trioxide: %


3,0 maximum

Chloride: % <0,02 0,1 maximum

All % calculated by mass. Under the second table should be the following text: Please contact our toll-free help-line if actual figures are required.


Physical Properties
Typical Test Results
Specification requirements
SAZS ENV 413-1
MC 22,5
Setting times:
Initial: minutes
Final: Hours


60 minimum
15.0 maximum

Specific Surface (Blaine): m2/kg
Fineness: Residue on 212 pm screen: %


15.0 maximum
Soundness: Le Chatelier Expansion (mm) 1 10 maximum

Typical mortar prism results determined in
accordance with EN 196-1

Early strength at 7 days(MPa)
Standard strength at 28 days(MPa)



>22.5 <42.5
Relative density
Bulk density, aerated, kg/m3
Bulk density, as packed, kg/m3   

Approximate Volume: 50kg bag, litres ± 35  


IMPORTANT NOTE: The information and/or specifications contained herein are given in good faith as being true and accurate but no liability is accepted by PPC, its employees, distributors, representatives or agents, for any loss or damage, direct or indirect, resulting from using the information, following the specifications or adopting recommendations and/or suggestions as actual conditions of use are beyond its control. This data sheet was published in November 2006.



Bulk storage silos should be inspected on a regular basis to ensure that the inspection hatch seal is watertight and filters are clean and unblocked. Cement bags are not weather-proof and should be stored under cover, off the ground to a maximum height of 12 bags.


PMC is available from the Bulawayo Factory and various retail outlets. Please check with your local sales office for further details.Contact us for further details.


Bags – 50 kg Polypropylene bags
  • Unitised 40 bags (2 tons) per unit
  • Unitised on a pallet 40 bags (2 tons) per unit
  • Unitised on a pallet and covered with plastic hood. 40 bags (2 tons) per unit.
(Please note the hood is shower-proof NOT waterproof)

  • Bulk cement in road or rail tankers is not recommended as the high transportation cost does not make this viable
View the Terms & Conditions
  Add this article to your tool box  

Buildersapp Banner



Cement Calendar Heading

<September 2018>